RB-MOS/D800M Fiber composite sliding plate for Marine Fender.

More durability! Higher load! Low Friction!

RB-MOS/D800M is made of Fiber fabric composite, self lubricating and maintenance free and it has been widely used for marine and offshore industry due to its high durability, higher load limit, low friction as well as low water swelling properties. One of the application is marine fender.

Why RB-MOS/D800M?

Marine fender typically made of rubber or plastic. Plastic includes Ultra High Molecular Weight polyethylene (UHMW-PE) or High Density polyethylene (HDPE). All of plastic fenders can be used for Fender, but it has several limitation. One of them is the compressive strength. This compressive strength leads to how the plates can take load/ compression during operation. It leads to durability of the plates.

RB-MOS/D800M fenders has high load/compressive capacity compare to those plastic fenders. Here is the datasheet comparison of some major properties

Parameter/Material	UHMWPE	HDPE	RB-MOS/D800M
Ultimate compressive strength (mpa)	5-20	15-30	395
Impact strength (Kj/m2)	70-100	13-26	100
Friction coefficient  (DIN/EN/ISO 8295)	0.15-0.20	0.20-0.25	0.15-0.18
Density (g/cm3)	0.93-0.96	0.90-0.95	1.00-1.30
Hardness (rockwell M)	Below 50	Below 50	100
Operating Temperature (°C)	-200 to +80	-20 to +70	-40 to +130

Above data proves that RB-MOS/D800M has huge compressive strength as well as load limit to cater high loading and higher impact resistance

Lets take an example of 100x100mm (width x length) plate

UHMWPE & HDPE  load limit

P= F/A

Given: P= 20mpa

A= 100x100 = 10,000mm2

F = 20x10,000 = 200,000N = 20tons

> 1 plate UHMWPE 100x100mm can hold max 20tons load

RB-MOS/D800M  load limit

P= F/A

Given: P= 395mpa

A= 100x100 = 10,000mm2

F = 395x10,000 = 3,950,000N = 395tons

> 1 plate RB-MOS/D800M 100x100mm can hold max. 395tons load.

RB-MOS/D800M can hold approx. 20x more load than UHMWPE / HDPE!

RB-MOS/D800 Application for marine & offshore:

• Fender panel facing
•  Sliding plate
• V fender shield
• Offshore telescopic cranes
• A-frame launcher skidding plates
• Quay wall protection
• Pile protection
• Rig Platform protector
• Other marine application

RB-MOS/D800M Colour:

1. Black
2. Yellow
3. Blue

RBA - Custom made bearings specialist!

Kami terspesialisasi custom made oiles bushing & juga satu satu nya ahli dalam custom oiles bushing untuk industri anda. Kami menghadirkan produk Eksklusif terbaik kepada client kami.

Kami merupakan perusahaan tunggal dalam custom oiles bushing bebas pelumasan & sudah banyak client kami yang sudah mempercayakan kami. dan juga sekaligus supplier oiles bushing bebas pelumasan ,serta distributor oiles bushing bebas pelumasan.

Oiles bushing bebas pelumasan kualtas tinggi dimana kami menghadirkan produk eklskusif untuk client kami , Oiles Bushing Bebas Pelumasan juga anti pelumas dimana sudah dapat terlumasi sendiri nya tanpa harus diberi pelumas ,

Oiles Bushing dijamin anti karat yang digunakan bahan bermutu tinggi , Oiles Bushing dapat terlumasi dengan pelumasan sendiri, Oiles bushing yang kami produksi bebas gemuk/oli dimana dapat mencegah kotoran pada saat pengerjaan.

RBA menyediakan berbagai macam straight oiles bushing bebas pelumasan:

– Oiles bushing bebas pelumasan self-lubricating (no grease required).

– Oiles bushing bebas pelumasan with High load capacity.

– Oiles Bushing bebas pelumasan with Standard/custom dimension available within short notice.

Hubungi kami segera :

PT Raja Bearindo Aditama (RBA®)

Headquarters:
Jl. Puri Kencana Blok K6 No. 2L-2M
Kembangan Selatan, Kembangan
Jakarta Barat - 11610

Office:
Gedung Inlingua Lt 2  
Jl. Puri Indah Raya Blok A3/2 No. 33-35  
Jakarta Barat, 11610 - Indonesia

Telephone : +6221 2258 4993 (Direct)
Email : sales@rajabearindo.co.id